AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
24/7 Support : 1-714-705-4780
sales@industrials360.com
Industrial products list as per UNSPSC Page 5
Showing 5 of 5
| Part No. | Manufacturer | Description | Qty | RFQ |
|---|---|---|---|---|
| AXMT170508PEERH-ACK300 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.180 in, Positive | Avl |
|
| WDMT0603ZDTR-ACP200 | Sumitomo | Trigon Milling Insert, Inscribed Circle 1/4 in, Rake -3 to -8 Radial;8 Axial | Avl |
|
| M270TF12R05 | Widia | Milling Insert, Inscribed Circle 12.00mm, Positive | Avl |
|
| XNPU1502ERML | Widia | Milling Insert, Inscribed Circle 0.394 in, Rake Positive | Avl |
|
| RDET1204M0EN-H-ACP200 | Sumitomo | Round Milling Insert, Inscribed Circle 0.4720 in, Rake -5 Radial, 10 Axial | Avl |
|
| LNEX130632PNER-G-ACK200 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.180 in, -31 to -15 Radial, -6 Axial | Avl |
|
| SOMT080312PZER-G-ACK200 | Sumitomo | Square Milling Insert, Inscribed Circle 0.130 in, Rake -6 Radial, 6 Axial | Avl |
|
| AXMT170520PEERG-ACP100 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.180 in, Positive | Avl |
|
| XNMU060616PNER-H-ACK300 | Sumitomo | Triangle Milling Insert, Inscribed Circle 0.180 in, -5 Radial, -9 Axial | Avl |
|
| LNEX080404PNER-G-ACP200 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.140 in, -13 to -12 Radial, -6 Axial | Avl |
|
| XNMU060604PNER-G-ACM300 | Sumitomo | Triangle Milling Insert, Inscribed Circle 0.180 in, -5 Radial, -9 Axial | Avl |
|
| M270TF20R1 | Widia | Milling Insert, Inscribed Circle 20.00mm, Positive | Avl |
|
| SNMT13T6ANER-FG-ACK200 | Sumitomo | Square Milling Insert, Inscribed Circle 0.5315 in, Rake -10 Radial, -5 Axial | Avl |
|
| XNPU1503SRMM | Widia | Milling Insert, Inscribed Circle 0.394 in, Rake Positive | Avl |
|
| ZNMT4CX-ACK300 | Sumitomo | Ball Nose Milling Insert, Inscribed Circle 0.190 in, Rake Positive | Avl |
|
| SDEW1406ZDTR-CS3000 | Sumitomo | Square Milling Insert, Inscribed Circle 0.5510 in, Rake -5 Radial, 10 Axial | Avl |
|
| SDR100031E0W4 | Widia | Milling Insert, Inscribed Circle 0.380 in, Rake Positive | Avl |
|
| SOMT120408PDER-G-ACP100 | Sumitomo | Square Milling Insert, Inscribed Circle 1/2 in, Rake -8 Radial, 8 Axial | Avl |
|
| WDMT0804ZDTR-H-ACK200 | Sumitomo | Trigon Milling Insert, Inscribed Circle 0.3350 in, Rake -3 to -8 Radial;8 Axial | Avl |
|
| XNMU060616PNER-G-ACM300 | Sumitomo | Triangle Milling Insert, Inscribed Circle 0.180 in, -5 Radial, -9 Axial | Avl |
|
| WDMT0804ZDTR-ACP200 | Sumitomo | Trigon Milling Insert, Inscribed Circle 0.3350 in, Rake -3 to -8 Radial;8 Axial | Avl |
|
| AXMT170530PEERG-ACP200 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.180 in, Positive | Avl |
|
| SOMT080308PZER-H-ACP300 | Sumitomo | Square Milling Insert, Inscribed Circle 0.130 in, Rake -6 Radial, 6 Axial | Avl |
|
| AXMT123504PEERG-ACP300 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.130 in, Positive | Avl |
|
| SNMT1205ZNEN-G-ACK100 | Sumitomo | Square Milling Insert, Inscribed Circle 1/2 in, Rake -5 Axial, -6 Radial | Avl |
|
| XNMU060612PNER-H-ACK200 | Sumitomo | Triangle Milling Insert, Inscribed Circle 0.180 in, -5 Radial, -9 Axial | Avl |
|
| XNGU1502SRMM | Widia | Milling Insert, Inscribed Circle 0.394 in, Rake Positive | Avl |
|
| AXMT170563PEER-E-EH520 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.180 in, Positive | Avl |
|
| SDEW1406ZDTR-ACP200 | Sumitomo | Square Milling Insert, Inscribed Circle 0.5510 in, Rake -5 Radial, 10 Axial | Avl |
|
| LNEX080408PNER-G-ACP200 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.140 in, -34 to -20 Radial, -6 Axial | Avl |
|
| XNMU060616PNER-H-ACM200 | Sumitomo | Triangle Milling Insert, Inscribed Circle 0.180 in, -5 Radial, -9 Axial | Avl |
|
| LNEX130608PNER-H-ACP300 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.180 in, -31 to -15 Radial, -6 Axial | Avl |
|
| WDMT0603ZDTR-H-ACP200 | Sumitomo | Trigon Milling Insert, Inscribed Circle 1/4 in, Rake -3 to -8 Radial;8 Axial | Avl |
|
| AXMT170520PEERE-ACM200 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.180 in, Positive | Avl |
|
| XNMU060608PNER-H-ACM200 | Sumitomo | Triangle Milling Insert, Inscribed Circle 0.180 in, -5 Radial, -9 Axial | Avl |
|
| LNMX170808PNSR-L-ACP100 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.180 in, -15 Radial, -6 Axial | Avl |
|
| AXMT123504PEERG-ACP100 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.130 in, Positive | Avl |
|
| LNEX130604PNER-G-ACK300 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.180 in, -31 to -15 Radial, -6 Axial | Avl |
|
| AXMT123504PEERE-ACP300 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.130 in, Positive | Avl |
|
| LNMX160608PNSN-G-ACK200 | Sumitomo | Diamond Milling Insert, Inscribed Circle 16.00mm, -15 Radial, -5 Axial | Avl |
|
| LNEX130632PNER-G-ACP200 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.180 in, -31 to -15 Radial, -6 Axial | Avl |
|
| SEMT13T3AGSR-H-ACM200 | Sumitomo | Square Milling Insert, Inscribed Circle 0.5280 in, Rake -20 to -24 Radial, 20 to 22 Axial | Avl |
|
| XNGU1502SRMH | Widia | Milling Insert, Inscribed Circle 0.394 in, Rake Positive | Avl |
|
| SNMT13T6ANER-FL-ACP300 | Sumitomo | Square Milling Insert, Inscribed Circle 0.5315 in, Rake -10 Radial, -5 Axial | Avl |
|
| AXMT123516PEERE-ACM300 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.130 in, Positive | Avl |
|
| LNMX170808PNSL-G-ACP300 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.180 in, Negative | Avl |
|
| SEMT13T3AGSR-L-ACK200 | Sumitomo | Square Milling Insert, Inscribed Circle 0.5280 in, Rake -20 to -24 Radial, 20 to 22 Axial | Avl |
|
| AXMT123512PEERG-ACK200 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.130 in, Positive | Avl |
|
| XNPU1503SRMM | Widia | Milling Insert, Inscribed Circle 0.394 in, Rake Positive | Avl |
|
| XNPU1502SRMM | Widia | Milling Insert, Inscribed Circle 0.394 in, Rake Positive | Avl |
|
| AXMT170516PEERE-ACM200 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.180 in, Positive | Avl |
|
| AXMT170530PEERG-ACP300 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.180 in, Positive | Avl |
|
| LNEX130616PNER-H-ACK300 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.180 in, -31 to -15 Radial, -6 Axial | Avl |
|
| SNMT1205ZNENSH-ACK300 | Sumitomo | Square Milling Insert, Inscribed Circle 1/2 in, Rake -5 Axial, -6 Radial | Avl |
|
| AXMT123512PEERG-ACP300 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.130 in, Positive | Avl |
|
| XNMU060616PNER-G-ACK200 | Sumitomo | Triangle Milling Insert, Inscribed Circle 0.180 in, -5 Radial, -9 Axial | Avl |
|
| AXMT123504PEERH-ACP200 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.130 in, Positive | Avl |
|
| ZNMT3CX-ACK300 | Sumitomo | Ball Nose Milling Insert, Inscribed Circle 0.140 in, Rake -10 Axial | Avl |
|
| ZPGU4S-ACZ120 | Sumitomo | Round Milling Insert, Inscribed Circle 0.260 in, Rake Positive | Avl |
|
| WDMT1406ZDTR-H-ACK200 | Sumitomo | Trigon Milling Insert, Inscribed Circle 0.5510 in, Rake -3 to -8 Radial;8 Axial | Avl |
|
| ZNMT3CX-ACZ310 | Sumitomo | Ball Nose Milling Insert, Inscribed Circle 0.140 in, Rake Positive | Avl |
|
| SNMT1205ZNEN-SH-ACK200 | Sumitomo | Square Milling Insert, Inscribed Circle 1/2 in, Rake -5 Axial, -6 Radial | Avl |
|
| SOMT080312PZER-H-ACK300 | Sumitomo | Square Milling Insert, Inscribed Circle 0.130 in, Rake -6 Radial, 6 Axial | Avl |
|
| AXMT170512PEERG-ACK300 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.180 in, Positive | Avl |
|
| SDEW1406ZDTR-ACK200 | Sumitomo | Square Milling Insert, Inscribed Circle 0.5510 in, Rake -5 Radial, 10 Axial | Avl |
|
| LNEX080408PNER-G-ACP300 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.140 in, -13 to -12 Radial, -6 Axial | Avl |
|
| XNMU060608PNER-L-ACP200 | Sumitomo | Triangle Milling Insert, Inscribed Circle 0.180 in, -5 Radial, -9 Axial | Avl |
|
| XNMU060612PNER-H-ACP300 | Sumitomo | Triangle Milling Insert, Inscribed Circle 0.180 in, -5 Radial, -9 Axial | Avl |
|
| LNEX130608PNER-L-ACM200 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.180 in, -31 to -15 Radial, -6 Axial | Avl |
|
| XNMU060612PNER-G-ACK200 | Sumitomo | Triangle Milling Insert, Inscribed Circle 0.180 in, -5 Radial, -9 Axial | Avl |
|
| M270TF20R4 | Widia | Milling Insert, Inscribed Circle 20.00mm, Positive | Avl |
|
| SOMT080312PZER-G-ACP100 | Sumitomo | Square Milling Insert, Inscribed Circle 0.130 in, Rake -6 Radial, 6 Axial | Avl |
|
| LNEX080404PNER-L-ACM300 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.140 in, -34 to -20 Radial, -6 Axial | Avl |
|
| SOMT080312PZER-H-ACM200 | Sumitomo | Square Milling Insert, Inscribed Circle 0.130 in, Rake -6 Radial, 6 Axial | Avl |
|
| LNEX080408PNER-G-ACK300 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.140 in, -13 to -12 Radial, -6 Axial | Avl |
|
| WDMT1406ZDTR-H-ACP300 | Sumitomo | Trigon Milling Insert, Inscribed Circle 0.5510 in, Rake -3 to -8 Radial;8 Axial | Avl |
|
| LNMX 170808PNSR-G ACP200 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.180 in, -15 Radial, -6 Axial | Avl |
|
| AXMT170530PEERG-ACP100 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.180 in, Positive | Avl |
|
| SDR100031E1W4 | Widia | Milling Insert, Inscribed Circle 0.380 in, Rake Positive | Avl |
|
| ZNMT3CX-ACZ350 | Sumitomo | Ball Nose Milling Insert, Inscribed Circle 0.140 in, Rake Positive | Avl |
|
| AECT220632PEFRA-H1 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.240 in, -10 Radial, 19 to 25 Axial | Avl |
|
| SNMT13T6ANER-G-ACP100 | Sumitomo | Square Milling Insert, Inscribed Circle 0.5315 in, Rake -10 Radial, -5 Axial | Avl |
|
| LNEX080416PNER-G-ACP300 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.140 in, -13 to -12 Radial, -6 Axial | Avl |
|
| AECT220640PEFRA-H1 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.240 in, -10 Radial, 19 to 25 Axial | Avl |
|
| SOMT120408PDER-H-ACP100 | Sumitomo | Square Milling Insert, Inscribed Circle 1/2 in, Rake -8 Radial, 8 Axial | Avl |
|
| XNMU060616PNER-G-ACK300 | Sumitomo | Triangle Milling Insert, Inscribed Circle 0.180 in, -5 Radial, -9 Axial | Avl |
|
| RDET10T3M0EN-H-ACM200 | Sumitomo | Round Milling Insert, Inscribed Circle 0.3940 in, Rake -5 Radial, 10 Axial | Avl |
|
| AXMT123512PEERG-ACP100 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.130 in, Positive | Avl |
|
| SOMT120408PDER-G-ACM300 | Sumitomo | Square Milling Insert, Inscribed Circle 1/2 in, Rake -8 Radial, 8 Axial | Avl |
|
| ZNMT4CX-ACP200 | Sumitomo | Ball Nose Milling Insert, Inscribed Circle 0.190 in, Rake Positive | Avl |
|
| ZNMT5CX-ACK300 | Sumitomo | Ball Nose Milling Insert, Inscribed Circle 0.230 in, Rake Positive | Avl |
|
| SOMT120408PDER-L-ACM200 | Sumitomo | Square Milling Insert, Inscribed Circle 1/2 in, Rake -8 Radial, 8 Axial | Avl |
|
| XNMU060604PNER-L-ACP200 | Sumitomo | Triangle Milling Insert, Inscribed Circle 0.180 in, -5 Radial, -9 Axial | Avl |
|
| XNMU060612PNER-H-ACP200 | Sumitomo | Triangle Milling Insert, Inscribed Circle 0.180 in, -5 Radial, -9 Axial | Avl |
|
| AXMT170512PEERG-ACP300 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.180 in, Positive | Avl |
|
| LNMX170808PNSR-G-ACK200 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.180 in, -15 Radial, -6 Axial | Avl |
|
| XNMU060612PNER-G-ACK300 | Sumitomo | Triangle Milling Insert, Inscribed Circle 0.180 in, -5 Radial, -9 Axial | Avl |
|
| LNMX170808PNSR-G-ACP200 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.180 in, -15 Radial, -6 Axial | Avl |
|
| LNEX130632PNER-G-ACK300 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.180 in, -31 to -15 Radial, -6 Axial | Avl |
|
| AECT160440PEFRA-H1 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.170 in, -10 Radial, 19 to 25 Axial | Avl |
|
| AXMT170504PEERG-ACK300 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.180 in, Positive | Avl |
|
| SOMT120408PDER-L-ACM300 | Sumitomo | Square Milling Insert, Inscribed Circle 1/2 in, Rake -8 Radial, 8 Axial | Avl |
|
| SEMT13T3AGSR-H-ACK300 | Sumitomo | Square Milling Insert, Inscribed Circle 0.5280 in, Rake -20 to -24 Radial, 20 to 22 Axial | Avl |
|
| AXMT123512PEERH-ACP200 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.130 in, Positive | Avl |
|
| ZNMT6X-ACZ310 | Sumitomo | Ball Nose Milling Insert, Inscribed Circle 0.260 in, Rake Positive | Avl |
|
| ZNMT3SX-ACK300 | Sumitomo | Ball Nose Milling Insert, Inscribed Circle 0.140 in, Rake Positive | Avl |
|
| XNPU1505SRMM | Widia | Milling Insert, Inscribed Circle 0.394 in, Rake Positive | Avl |
|
| XNGU1502ERML | Widia | Milling Insert, Inscribed Circle 0.394 in, Rake Positive | Avl |
|
| SOMT120416PDER-G-ACM300 | Sumitomo | Square Milling Insert, Inscribed Circle 1/2 in, Rake -8 Radial, 8 Axial | Avl |
|
| LNEX080416PNER-G-ACK300 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.140 in, -13 to -12 Radial, -6 Axial | Avl |
|
| WDMT1205ZDTR-H-ACK300 | Sumitomo | Trigon Milling Insert, Inscribed Circle 0.4720 in, Rake -3 to -8 Radial;8 Axial | Avl |
|
| ONMT05T6ANER-G-ACK200 | Sumitomo | Octagon Milling Insert, Inscribed Circle 0.5315 in | Avl |
|
| SDMW1406ZDTR-ACP300 | Sumitomo | Square Milling Insert, Inscribed Circle 0.5510 in, Rake -5 Radial, 10 Axial | Avl |
|
| LNEX130608PNER-L-ACP200 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.180 in, -31 to -15 Radial, -6 Axial | Avl |
|
| LNEX130608PNER-L-ACM300 | Sumitomo | Diamond Milling Insert, Inscribed Circle 0.180 in, -31 to -15 Radial, -6 Axial | Avl |
|
| SDEW1406ZDTR-ACK300 | Sumitomo | Square Milling Insert, Inscribed Circle 0.5510 in, Rake -5 Radial, 10 Axial | Avl |
|
| SNMT13T6ANER-G-ACP200 | Sumitomo | Square Milling Insert, Inscribed Circle 0.5315 in, Rake -10 Radial, -5 Axial | Avl |
|
| AXMT123504PEERH-ACK200 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.130 in, Positive | Avl |
|
| WDMT0804ZDTR-ACK200 | Sumitomo | Trigon Milling Insert, Inscribed Circle 0.3350 in, Rake -3 to -8 Radial;8 Axial | Avl |
|
| AXMT170563PEER-E-ACM300 | Sumitomo | Parallelogram Milling Insert, Inscribed Circle 0.180 in, Positive | Avl |
|
| LNMX1606-W-ACK300 | Sumitomo | Diamond Milling Insert, Inscribed Circle 16.00mm, Negative | Avl |
|
| RDET10T3M0EN-H-ACM300 | Sumitomo | Round Milling Insert, Inscribed Circle 0.3940 in, Rake -5 Radial, 10 Axial | Avl |
|
Recently Viewed Parts
|
Guaranteed On - Time Delivery |
|
Customized & User-Friendly Database |
|
Over 5100 Manufacturers |
|
Scheduling Flexibility |
|
Complete Purchasing Solutions |
|
Complete Purchasing Solutions |
Semiconductor's Certifications and Memberships
Thank You for Visiting.
We hope that you will visit us again the next time you need industrial parts and make us your strategic purchasing partner.
Request for Quote